WaveSurfer Xs Series 24XS, 42XS, 44XS, 62XS, 64XS & 104XS Color Digital Oscilloscopes
  
 
  • 400 MHz - 1 GHz Bandwidth; 2 or 4 Channels
    WaveSurfer 24XS: 200 MHz, 4 Channels
    WaveSurfer 42XS: 400 MHz, 2 Channels
    WaveSurfer 44XS: 400 MHz, 4 Channels
    WaveSurfer 62XS: 600 MHz, 2 Channels
    WaveSurfer 64XS: 600 MHz, 4 Channels
    WaveSurfer 104XS: 1 GHz, 4 Channel
  • Sample Rate:
    Single Shot: 2.5 GS/s (all channels)
    RIS Mode: 50 GS/s
  • Std Record Length 2 Mpts (all channels)
  • Big 10.4" Color LCD Touch-Screen Display
  • Small 6" footprint



  
       
 
Specifications WaveSurfer 42Xs WaveSurfer 44Xs WaveSurfer 42 Xs WaveSurfer 64 Xs WaveSurfer 62 Xs WaveSurfer 104 Xs
Bandwidth (@ 50 Ω)
200 MHz
400 MHz
600 MHz
1 GHz
Rise Time
1.75 ns
875 ps
625 ps
400 ps
Input Channels
4
4
2
4
2
4
Display
10.4" Color flat-panel TFT-LCD, 800 x 600 SVGA, touch screen
Sample Rate (single-shot)
2.5 GS/s
 2.5 GS/s (5 GS/s
interleaved)
Sample Rate (RIS mode)
50 GS/s
Standard Record Length
2.5 Mpts/Ch (all channels)
Standard Capture Time
up to 1 ms at full sample rate on all four channels
Vertical Resolution
8 bits
Vertical Sensitivity (V/div)
2 mV/div–10 V/div (1 MΩ); 2 mV/div–1 V/div (50 Ω)
Vertical (DC Gain) Accuracy
±1.0% of full scale (typical); ±1.5% of full scale ≥ 10 mV/div (warranted)
BW Limit
20 MHz
20 MHz, 200 MHz
Maximum Input Voltage
50 Ω: 5 Vrms, 1 MΩ: 400 V max.(DC + Peak AC ≤ 5 kHz)
 50 Ω: 5 Vrms 1 MΩ: 250 V max.(DC + Peak AC ? 10 kHz)
Input Coupling
AC, DC, GND (DC and GND for 50 Ω)
Input Impedance
1 MΩ || 16 pF, or 50 Ω
 1 MΩ || 20 pF,or 50 Ω
Probing System
BNC or ProBus
Probes
One PP009 (5 mm) per channel (standard)
 One PP011 (5 mm) per channel
(standard)
Timebase Range
200 ps/div–1000 s/div (roll mode from 500 ms/div–1000 s/div)
Timebase Accuracy
≤ 5 ppm @ 25 °C (typical) (≤ 10 ppm @ 5–40 °C)
Trigger Modes
Normal, Auto, Single, and Stop
Trigger Sources
Any input channel, External, Ext/10, or line; slope and level unique to each source (except for line trigger)
Trigger Coupling
DC, AC, HFRej, LFRej
Pre-trigger Delay
0–100% of full scale
Post-trigger Delay
0–10,000 divisions
Trigger Hold-off
1 ns to 20 s or 1 to 1,000,000,000 events
Internal Trigger Level Range
±4.1 div from center
External Trigger Range
EXT/10 ±4V; EXT ±400 mV
   
Triggering  
Standard
Edge, Glitch, Width, Logic (Pattern), TV-Composite Video
Advanced (WS Xs-ADVTRIG)
Runt, Slew Rate, Interval (Signal or Pattern), Dropout, Qualified (State or Edge)
   
Measure, Zoom, and Math Tools  
Standard Parameter Up to 6 of the following parameters can be calculated at one time on any waveform: Amplitude, Area, BaseMeasurements (Low), Delay, Duty, Fall Time (90%-10%), Fall Time (80%-20%), Frequency, Maximum, Mean, Minimum,Overshoot+, Overshoot-, Period, Peak-Peak, Phase, Rise Time (10%-90%), Rise Time (20%-80%), RMS, Skew,Standard Deviation, Top (High), Width+, Width-. Measurements can be gated.
Zooming Use front panel QuickZoom button, or use touch screen or mouse to draw a box around the zoom area.
Standard Math Operators include Sum, Difference, Product, Ratio, and FFT (up to 25 kpts with power spectrum
output and rectangular, VonHann, and FlatTop windows). 1 math function may be defined at a time.
Extended Math (WSXs-MATHSURF Option) Adds the following additional math functions: Absolute Value, Averaging (summed and continuous),Derivative, Envelope, Enhanced Resolution (to 11 bits), Floor, Integral, Invert, Reciprocal, Roof, Square, andSquare Root. Also adds chaining of two math functions and rescaling to different units, and 1 Mpts FFTs.

 

 

  
  Feature :    
  Long Capture Time  
  2.5 Mpts/Ch of fast acquisition memory standard (10 Mpts/Ch optional) provides long capture time-up to 400 ms at full sample rate, and longer times at lower sample rates. This greatly assists in debugging common circuit problems such as clock/data issues and timing errors. Use the touch screen to quickly "draw a box" around the area of interest and zoom all channels to the desired area. Then, adjust zoom position and ratio from the front panel or the graphical touch screen UI. WaveSurfer Xs long memory is also thoughtfully designed to respond quickly, even when measurements, math, or serial decoders are being used.  
 
 
  WaveStream™ Fast Viewing Mode    
  WaveStream provides a vibrant, intensity graded (256 levels) display with a fast update to closely simulate the look and feel of an analog oscilloscope. Turn WaveStream ON or OFF, and adjust intensity, using the front panel knob. Use it only when you want to.  
 
 
  WaveScan™ Advanced Search    
  Searching for data is very helpful, but wouldn't it be better to Search for something you can't trigger on? WaveScan allows searching in a single acquisition using more than 20 different modes. Or, set up a Scan condition and scan for an event over hours or days, and perform some action when it is found.  
 
 
  Mixed Signal Oscilloscope option    
  Add 32 digital channels to a 4-channel WaveSurfer Xs with the MS-32 Mixed Signal Oscilloscope option. Includes 32 Mpts of digital memory (1 Mpts/Ch) for long capture times.  
 
 
  I2C, SPI and CAN Trigger & Decode (optional)    
  Complete I2C, SPI, and CAN serial triggering, including powerful I2C and CAN conditional data triggering, allows quick and easy isolation of specific events on your embedded controller. Trigger on DATA in specific locations of long I2C EEPROM reads, or trigger on I2C sensor values outside of a certain range. Intuitive, color-coded decode overlay helps you understand your serial data signals quickly. Search for data patterns, or view the protocol data in a table. Export table data to Excel. (Capabilities are optional).  
 
 
  ZS Series High Impedance Active Probes (Accessories)  
  LeCroy's new ZS Series of high impedance active probes provide full bandwidth at the probe tip, and the high impedance (1 MΩ || 0.9 pF) you want. A variety of standard and available probe tip and grounding accessories are offered to meet any requirement. What's more, ZS Series probes are available for a very affordable price. Use the ZS1000 with 200 to 600 MHz WaveSurfers and the ZS1500 with 1 GHz WaveSurfers to give full system bandwidth at the probe tip.  
 
 
       
 
产品目录 | 品牌目录 | 型号目录 | 主页